For the new generation of environmentally friendly anti -corrosion primer, it uses water -based alcoholic acid resin, nano -functional materials, rust -proof pigments, corrosion agents and auxiliary preparations. It does not contain organic solvents; does not add high rust -proof pigments with high metal content such as chromium and lead.

Scope

The various large steel structures, machinery and equipment, hardware products, and cast iron parts are suitable for various large steel structures; in addition to matching facial paint with the company, they can also be used as various solvent -based anticorrosive coatings and other metal grassroots industrial paint support bases paint.

Product performance

1. Good anti -corrosion capabilities to meet the protection requirements of the entire coating;

2. With water as a dispersing medium, there are no toxic and harmful substances in the construction process and coating film formation process, which meets environmental protection requirements;

3. Good adhesion, excellent chemical resistance;

4. Good supporting, the coating film and the metal substrate are firmly attached, which can enhance the adhesion of the upper coating film.

Construction description

Surface treatment: The performance of coatings is usually proportional to the degree of surface treatment.

New Steel: sandblasting meets the SA2 standard. If you need to protect the surface temporarily, you can apply appropriate workshop primer. Finally, clean the damaged workshop primer and pollution site before spraying, and then apply this product. For other surfaces: removing fat with a cleaning agent, remove salt and other pollutants with high pressure fresh water. Clear rust and loosening coating with sandblasting and power tools. Construction according to the best construction conditions according to normal requirements, and a large amount of ventilation should be ventilated during the narrow space.

Construction conditions: coating, brushing, and spraying can be used. It is recommended to use high -pressure airless spraying to obtain a uniform and good coating film. Before construction, it must be stirred. If the viscosity is too large, you can add clean water to the construction viscosity as appropriate. In order to ensure the quality of the paint film, we recommend that the amount of water adding water is 5%to 15%of the weight of the original paint. Multiple constructions are used, and the painting must be carried out before the lacquer membrane surface before it is done. The relative humidity is less than 85%, the construction surface temperature is greater than 10 ° C and the temperature of the dew point is 3 ° C.

Rain, snow, weather can not be constructed outdoors, such as construction, can be taken to protect the paint film with cloth cover and other methods.

Technical Parameters

Suggested matching